[arm-allstar] raspberry pi audio level question

[Corey Dean]

If I remember correctly the google voice is already set a little lower than full.  If that is the case then your input audio must be to low and you are compensating for it with your transmit audio.

Corey

> On Jul 14, 2015, at 4:25 PM, Neil k8it <k8it at cac.net> wrote:
> 
> just built a raspberry pi node and its working great. I used simpleusb-tune-menu and set all the levels. however the spoken computer voices, ids, text to speech etc all have too much audio.
> is there a parameter to globally reduce the spoken audio levels without reducing the transmit audio levels feeding the radio as received audio levels are ok.
>  
>  
>  
> Thanks
> 73 Neil Sablatzky  K8IT
> Allstar Node 41838 KITLINK
> Allstar Node 42087 KITLINK HUB
> IRLP Node exp0068
> Echolink K8IT-L
> 
>  
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150714/08c7083b/attachment.html>