[arm-allstar] PI 2 GPIO

[Doug Crompton]

All I can say is soon but due to family commitments and that it is vacation time here in the states things have been delayed. We have discussed this among our group and I will also say again that  either way you need to build electronics and the apprehension towards modifying the FOB is really unjustified. It is not that hard and you really have little to lose in trying. On the other hand if you spiked the I/O on the main board you might be looking at replacing a much more expensive item. Having wires running from two different places just makes for a sloppier and more prone to problems installation. That being said you will have the option in the next version when it comes out.

http://crompton.com/hamradio/usb_fob_simple_modification/

Also there is now GPIO support on the Pi release for general purposes. That is used now in the shutdown mod -

http://crompton.com/hamradio/RPi2_halt_switch/

http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/GPIO_how-to.pdf

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Fri, 10 Jul 2015 06:43:20 +0100
> To: arm-allstar at hamvoip.org
> From: g8sau at sidx.org.uk
> Subject: [arm-allstar] PI 2 GPIO
> 
> Hi
> 
> Has the PI 2 code been let loose yet I have a running copy not sure of the 
> actual version. as it came from another source. But would like to test the 
> new code with the corrected delays fixed and most important for me the GPIO 
> use so I dont have to use a modified usb sound fob
> 
> I currently use URIx's for all projects but would like to try out the plane 
> old usb sound fob's
> 
> Thanks Barry G8SAU 2536 27370 27415 28202 28203
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150710/9a31f01d/attachment.html>