[arm-allstar] Yaesu DR-1X Interface

[kk6ecm]

From the for-what-it's-worth department... I learned the other day there are three software updates for the DR-1X, and Yaesu has a fix for an over heating problem. Seems they have a baffle that improves the air flow when installed.

Thanks,
Bob
kk6ecm

Sent from iPad


> On Dec 19, 2015, at 8:29 PM, Jeff Carlyle KD0QCN <kd0qcn at aecimo.org> wrote:
> 
> Hey Doug and All,
> 
> OK, here is where I am on the interface, I followed your how to on hamvoip, the only thing I did different was I am going high on COS polarity because I didn't have the items necessary to do it and I'm an hour away from the nearest radio shack.  I set carrierfrom = USB to compensate.  Everything seems to be working fine except I have VERY low TX audio, as in the volume on my test radio is all the way up and can barely hear it. Local speaker audio is fine.  I even turned on the amplifier in the uri as suggested in the how to. What am I missing?
> 
> Thanks,
> Jeff Carlyle 
> KD0QCN 
> 
> 
>> On Nov 30, 2015, at 3:57 PM, Doug Crompton <doug at crompton.com> wrote:
>> 
>> As I remember the ham I modified it for had tried the back connector and something did not work. I confirmed that again but I forget what didn't work. I am checking with the other ham and if I find anything out I will let you know. So in the end it was just easier to do the same mod as the DR1. 
>> 
>> 73 Doug
>> WA3DSP
>> http://www.crompton.com/hamradio
>> 
>> 
>> From: kd0qcn at aecimo.org
>> Date: Mon, 30 Nov 2015 13:07:55 -0600
>> To: arm-allstar at hamvoip.org
>> Subject: Re: [arm-allstar] Yaesu DR-1X Interface
>> 
>> Doug,
>> 
>> Thanks for the clarification, would you be so kind as to expand on the problems you had using the back connector?  I would like to be able to explain to the club why I need to do it the way you explained vs just using the back connector.
>> 
>> Thanks,
>> Jeff 
>> KD0QCN 
>> 
>> 
>> On Nov 30, 2015, at 10:55 AM, Doug Crompton <doug at crompton.com> wrote:
>> 
>> Jeff,
>> 
>>  I did go on to modify a DR1X and found problems with using the back connector. I ended up modifying it the same way as the DR1 and it worked fine with Allstar as a controller. Doing it the way I show in the mod works on both the DR1 and DR1X.
>> 
>> 73 Doug
>> WA3DSP
>> http://www.crompton.com/hamradio
>> 
>> 
>> To: arm-allstar at hamvoip.org
>> From: kd0qcn at aecimo.org
>> Date: Mon, 30 Nov 2015 08:32:10 -0600
>> Subject: Re: [arm-allstar] Yaesu DR-1X Interface
>> 
>> Doug,
>> 
>> I did read the howto on hamvoip.org.  I was really wanting to use the 15 pin connector on the back of the DR-1X.  You stated in the howto that you did not have access to the DR-1X and you were unsure of how to interface with that 15 pin.  That is what I'm trying to figure out as we are trying to avoid cutting into the main harness inside the repeater.  Really all I need is something as simple as pin 1 of URI to pin 2 of DR-1X etc...  I was hoping someone had done this already as I hate to re-invent the proverbial wheel.
>> 
>> 73,
>> Jeff
>> KD0QCN
>> 
>> On 11/30/2015 1:42 AM, Doug Crompton wrote:
>> Did you read the howto on the hamvoip.org web page?
>> 
>> 73 Doug
>> WA3DSP
>> http://www.crompton.com/hamradio
>> 
>> 
>> > From: kd0qcn at aecimo.org
>> > Date: Sun, 29 Nov 2015 23:57:48 -0600
>> > To: arm-allstar at hamvoip.org
>> > Subject: [arm-allstar] Yaesu DR-1X Interface
>> > 
>> > Hi All,
>> > 
>> > My club has put me in charge of setting up a RPi2 with Allstar and interface that with our DR-1X repeater using a DMK URI. The problem I am having is I am seeing some information on the DR-1 interface but not on the DR-1X. The DR-1X uses the 15 pin plug on the back of the repeater. We are not concerned with keeping the digital side of the repeater at this point. Has anyone done this interface and might possibly have the schematic of how you did it, or even something as simple as what pins you used?
>> > 
>> > Thanks in advance for any help!
>> > 
>> > Jeff 
>> > KD0QCN 
>> > _______________________________________________
>> > 
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> > 
>> > Visit the BBB and RPi2 web page - http://hamvoip.org
>> > 
>> 
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2 web page - http://hamvoip.org
>> 
>> 
>> _______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2 web page - http://hamvoip.org
>> 
>> _______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151219/a4533488/attachment-0001.html>