[arm-allstar] Commands thru ssh

[Robert Conklin]

Perfect!!
Thank you.

Sincerely
Rob
N4WGY

On Wed, Dec 2, 2015 at 9:28 PM, Doug Crompton <doug at crompton.com> wrote:

> Rob,
>
>  Any command can be executed through ssh. The most common ones that you
> mentioned are shown below.
>
> First you need to start the client at the Linux prompt after login.
>
> asterisk -rvvv
>
> You will then get the prompt:
>
> CLI>
>
> to execute commands as dtmf would -
>
> rpt fun <your-node> <dtmf-command>
>
> So if your node number was 40000 and you wanted to connect to 40001 -
>
> rpt fun 40000 *340001
>
> Disconnect -
>
> rpt fun 40000 *140001
>
> Say ID -
>
> rpt fun 40000 *80
>
> Say time -
>
> rpt fun 40000 *81
>
> Remember you need to specify your own radio node or a node that is valid
> on that server.
>
> Type exit to leave the client.
>
> You can also send commands directly from the Linux prompt. This is handy
> for scripts.
>
> asterisk -rx "rpt fun 40000 *81"
>
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Wed, 2 Dec 2015 19:37:28 -0600
> From: n4wgy.ham at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Commands thru ssh
>
> Is there a list of common commands that mirror the common dtmf commands
> like link disconnect, link status, etc that can be executed via ssh?
>
> -Rob Conklin
> N4WGY
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151202/a0f83ec0/attachment.html>