[arm-allstar] Question
LaRoy McCann
lmccann at dtisp.com
Fri Aug 28 09:03:30 EST 2015
I was going to ask this the other day but I got busy and forgot about it.
Does anyone a a repository of amateur radio related voice files that
could be shared?
Since Allison voice files are designed more for the Asterisk phone
system than amateur radio, maybe someone has developed an amateur library.
On 8/28/2015 8:40 AM, Doug Crompton wrote:
> Neil,
>
> NO, I meant just remove Google not any method of tts. The Cepstral
> method will be an option although as you point out you do need to buy
> the SW.
>
> The Allison files are GSM. Using the setup to form the call and
> combine.sh do essentially the same thing. Perhaps we should change the
> simple gsm to Allison gsm in the setup.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> ------------------------------------------------------------------------
> From: k8it at cac.net
> Date: Fri, 28 Aug 2015 08:49:45 -0400
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] Question
>
> Doug As you are aware some Amateurs have purchased voices to get a
> high quality voice audio. Being blind it's a must to buy voices and
> software much like buying a new handheld. Please do not remove the
> TTS support as the feature works if an. Amater wants to spend dollars.
> Maybe just remove the Google TTS option from the auto configure scripts.
> I do have a question about what script produces the GSM audio files.
> What are the differences between GSM and the Allison files we can
> hand edit and Cat together? Are they the same type of file but with a
> clever script That parcels the call sign ? If so what script is it and
> can it be used for other messages?
> 73 Neil K8IT
>
> Sent from my iPhone
>
> On Aug 27, 2015, at 11:26 PM, Doug Crompton <doug at crompton.com
> <mailto:doug at crompton.com>> wrote:
>
> Jeff,
>
> Good that you brought this up because this applies to anyone
> setting up a node from the image. The Google TTS has stopped
> working due to a change in Google's terms of use. We will no
> longer be able to use it on either the BBB or RPi2. This mostly
> effects the weather scripts which depended on it heavily but is
> also used to setup the voice ID if you select TTS voice at setup.
>
> The easy way to fix it is to run the node setup again (
> node-config.sh ) and hit enter through the selections as it will
> remember your last selection. When you get to the ID either select
> CW or simple gsm voice ID, NOT tts. Continue through the script to
> the end. Your ID should now be what you changed it to. You may
> need to do an astres.sh to restart Asterisk but I don't think that
> is necessary.
>
> The manual method is not hard but you have to understand how to
> edit and save files etc. If that is beyond the scope of you
> ability just use the simple way above.
>
> To do it manually you would first edit the
> /etc/asterisk/local/combine.sh script. Edit it an change the call
> and whatever you want to say to your text. Remember you are
> combining Allison voices together so the words or letters have to
> be in the Asterisk sounds directories. Then run the script to
> create a custom gsm voice file. You then call this file from rpt.conf
>
> edit the /etc/asterisk/rpt.conf file. Modify the following lines -
>
> idrecording=/etc/asterisk/local/node-id
> ;idrecording=|iDE WA3XYZ/L
>
> This shows the playing of the voice ID from a file called node-id
> in /etc/asterisk/local
>
> If you commented that line out (; before it) and uncommented the
> following line and replaced the call with your call it would do a
> CW ID.
>
> Also if you are using a voice ID you can set the idtalkover
> parameter to switch to CW when a station keys up over your ID
>
> idtalkover=|iDE WA3XYZ/L
>
> Obviously change to your call. The CW ID's will send any text you
> enter.
>
> We are working on a possible fix for the loss of Google TTS but
> there is no great free solution for TTS in Linux. The tts feature
> will be removed from the script or modified in the next update.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> > To: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> > From: jeffoli at sbcglobal.net <mailto:jeffoli at sbcglobal.net>
> > Date: Thu, 27 Aug 2015 18:29:18 -0700
> > Subject: [arm-allstar] Question
> >
> > I set my node up and it is up and running just fine but it is
> sending
> > the voice id of wa3xyz with pl 88.5. During the setup I told it
> to do
> > text to voice and I put my call sign in. Where can I go to
> correct this?
> >
> > Jeff
> > W6JSO
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
> _______________________________________________ arm-allstar mailing
> list arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit
> the BBB and RPi2 web page - http://hamvoip.org
>
> --
> This message has been scanned for viruses and
> dangerous content by the *DTISP MailScanner* <http://www.dtisp.com/>,
> and is
> believed to be clean.
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150828/4e9380e0/attachment-0001.html>
More information about the arm-allstar
mailing list