You have obviously made a lot of changes in the config. Nothing stands out to me but since there are some many combinations of changes it is hard to say what it could be. The only way to know for sure is to take a stock, installed from script, RPi2 and see if it has the problem.
Perhaps someone else out there is using the COP commands extensively and can answer to that?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
To: arm-allstar at hamvoip.org
From: ke6sth at ke6sth.ampr.org
Date: Wed, 12 Aug 2015 10:45:37 -0700
Subject: Re: [arm-allstar] voice announcement whiling using cop commands
When I 1st notice it is when I am making a script that I can send
a SMS be able to turn off and on the repeater by running the
following command from the shell (asterisk -r -x "rpt cmd 3 cop 2
1") I will also be working on being able to do this via APRS with
a TNC connected to the computer directly as well. Then I try other
COP commands and notice the announcements are going out global as
well. Like it to keep them quiet so it does not confuse anyone who
having a QSO on the network.
Here is the config on my RPi2 if there is a setting I need to
apply to all the nodes that would be fine for me to do long as the
local announcement still works.
---------------------------------------------
[3]
rxchannel = Radio/usb0
erxgain=-3
etxgain=3
controlstates=controlstates
scheduler=schedule3
morse=morse3
macro=macro3
functions=functions3
phone_functions=functions3
link_functions=functions3
telemetry=telemetry
wait_times=wait-times
context = radio
callerid = Repeater <000003>
accountcode=RADIO
hangtime=0
althangtime=0
totime=300000
idtime=600000
politeid=30000
nounkeyct=0
holdofftelem=1
telemdefault=0
beaconing=0
notelemtx = yes
startup_macro = *57
[morse3]
speed=20
frequency=800
amplitude=4096
idfrequency=750
idamplitude=512
[controlstates]
0 = rptena,lnkena,apena,totena,ufena,noicd
1 = rptena,lnkdis,apdis,totena,ufdis,noice
[schedule3]
[functions3]
1=ilink,1
2=ilink,2
3=ilink,3
4=ilink,4
5=macro,1
70=ilink,5
71=ilink,11
72=ilink,12
73=ilink,13
75=ilink,15
76=ilink,6
77=ilink,16
78=ilink,18
80=status,11
81=status,12
82=cmd,/usr/local/sbin/say24time.pl 3
61=autopatchup,context=pbx_server,noct=1,farenddisconnect=1,dialtime=20000,quiet=1
0=autopatchdn
980=status,3
99=cop,6 ; PPT on, # = release
[macro3]
1=*81 *80#
7=*7310
[telemetry]
remotetx=0
remotemon=0
cmdmode=|t(900,903,200,2048)
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
patchup=rpt/callproceeding
patchdown=rpt/callterminated
[wait-times]
telemwait=10
idwait=0
unkeywait=10
calltermwait=0
[nodes]
3 = radio at 127.0.0.1/3,NONE
10 = radio at 192.168.0.20/10,NONE
[memory]
#includeifexists custom/rpt.conf
On 8/12/2015 7:00 AM, Doug Crompton wrote:
OK well you answered part of my
question.
So did you do the RPi2 setup or copy configs from a prior
system?
There is not much we can offer not knowing exactly what you
did and also seeing at the least the rpt.conf file.
Are you using simpleusb.conf?
What COP commands are you issuing?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
To: arm-allstar at hamvoip.org
From: ke6sth at ke6sth.ampr.org
Date: Wed, 12 Aug 2015 00:55:35 -0700
Subject: Re: [arm-allstar] voice announcement whiling using
cop commands
I think its a config issue on my end as well.
I am using RPi2_V1.0_Allstar.img
On 8/12/2015 12:36 AM, Doug
Crompton wrote:
There is nothing different
about that code in the RPi2 at hamvoip.org vs. Acid. I
suspect it is a configuration issue of some kind.
My first question would be are you using the RPi2 image
from hamvoip.org? Did you run the setup scripts in that
image? Are you using config files from somewhere else?
73 Doug
WA3DSP
http://www.crompton.com/hamradio
To: arm-allstar at hamvoip.org
From: ke6sth at ke6sth.ampr.org
Date: Wed, 12 Aug 2015 00:10:33 -0700
Subject: Re: [arm-allstar] voice announcement whiling
using cop commands
This is a private link, none of the asterisk PC have
internet access its all 192.168.x.x IPs the links work
just fine been working for years then I decided to add a
440 digital repeater to the system and this time I
decided not to use intel PC and went with a RPi2 for the
1st time, everything works flawless except the annoying
announcements are going out everywhere. Each repeater
has its own node number I am using 1 thru 5 for
numbering the nodes.
On 8/11/2015 8:47 PM,
Tim Sawyer wrote:
That's not supposed to happen. I have
no idea what could possible be wrong.
I looked up your callsign, KE6STH and you don't
have an AllStar account. Are you building a
private network? Not that there is anything
wrong with that, I just wondering if you had
servers and nodes configured in the AllStar
portal.
Assuming you are building a private network,
did you give each node a unique node number? Is
each server's [nodes] section in rpt.conf
configured with the proper IP(s), port(s) and
node(s)? Is extensions.conf configured with the
correct node number? Are all these servers behind
a single NAT router? Did this problems start with
the introduction of the RPi?
On Tue, Aug 11, 2015 at
12:09 AM, Sione Ragle <ke6sth at ke6sth.ampr.org>
wrote:
All commands that responds back are heard
on all nodes that are over the link, there is
4 nodes and the one I am working on is a RPi2
the remote sites are intel PCs. They are not
local to each other completely different
site/PC
On 8/10/2015 8:01 PM, Tim Sawyer
wrote:
All the command responses
are heard on all you nodes? And these
are separate RPi2 nodes with one URI
each?
On Mon,
Aug 10, 2015 at 10:19 AM, Sione
Ragle <ke6sth at ke6sth.ampr.org>
wrote:
Thank you Tim and Doug for
getting back to me on this!
Its not just the node disable
command that does it, all the
"cop" commands I use is making
a global announcement.
I have control of all the
nodes that are linked in to
me, is there a way to disable
global announcement coming in
the links but still have it
work locally?
On 8/10/2015 7:07 AM, Doug
Crompton wrote:
I'll
admit I have not used
that command but it
sounds like it makes a
global announcement.
If that is the case
the only place you can
suppress it is at the
distant nodes but then
that would suppress
other messages also.
Why not make a script
that disconnects the
node you want to
disable from all
others - *76 then
disables it. If that
is what you want to
do.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
> To: arm-allstar at hamvoip.org
> From: ke6sth at ke6sth.ampr.org
> Date: Mon, 10 Aug
2015 03:18:05 -0700
> Subject:
[arm-allstar] voice
announcement whiling
using cop commands
>
> When I disable my
node via "cop 3"
command I hear the
announce of that
> command being
executed on all the
linked nodes, I set
telemdefault=0 on
> my node but I
still hear the
announcements on the
remote nodes, any idea
> how to prevent
that voice message
going out the links?
>
> Thanks,
> --Sione KE6STH
>
_______________________________________________
>
> arm-allstar
mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and
RPi2 web page - http://hamvoip.org
>
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page -
http://hamvoip.org
--
--
Tim
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
--
--
Tim
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150812/d7fd5ac1/attachment-0001.html>