[arm-allstar] size of sd card for RPI2
Pierre Martel
petem001 at gmail.com
Mon Aug 10 10:42:36 EST 2015
Thanks for the info.
He already destroyed 4 fob and the New one he got are all blob not the
chips.
Too bad it wont work with i/o
Le 2015-08-10 11:36, "Doug Crompton" <doug at crompton.com> a écrit :
> Pete,
>
> Either 8G or 16G is fine. We only use 4G of it. Just make sure you get
> class 10. The SanDisk Ultra is recommended. Amazon has them for $8 to $10
> or so. At one time there were lots of cheap knock-offs of these cards and I
> expect that is why there were lots of failures. This was often a topic on
> the IRLP Pi forum. Also people were buying the cheapest no name cards they
> could find. I use all San Disk and I have not heard of one failure even
> after a year of use. That being said you should always make backups.
>
> While the GPIO could be used on the RPi2 there is currently no support. We
> also now do not expect the support to be in the next update. Modification
> of the FOBs is really not that hard and even if you did do GPIO on the RPi2
> you still would need to build interface circuitry. It actually is a lot
> less kludgey to do everything with the FOB. Check out the simple FOB mod on
> the hamvoip.org web site in the howto's. There is one really easy way to
> solder the needed two wires to the chip shown there.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> From: petem001 at gmail.com
> To: arm-allstar at hamvoip.org
> Date: Mon, 10 Aug 2015 10:14:32 -0400
> Subject: [arm-allstar] size of sd card for RPI2
>
> what size of micro-sd card would you recommend to run on a rpi2?
>
> And would it be possible to run 2 unmoded usb dongle and use the i/o from
> the rpi2 to do the cor and ptt for both node?
>
>
>
> thanks.. asking for a friend that have large hands and no one around him
> that could do the soldering on the dongle [image: Clignement d'oil]
>
>
>
>
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150810/3003809e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wlEmoticon-winkingsmile[1].png
Type: image/png
Size: 1135 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150810/3003809e/attachment-0001.png>
More information about the arm-allstar
mailing list