[arm-allstar] CW ID

[Chuck]

I have seen the issue that you have before.  But it is difficult to
re-create.  It has something to do with using the monitor mode and the
connected mode, alternately.  At some point it results in your RF ID going
out to the monitored node.   The issue has been there for several years and
if I ever figure out exactly how to recreate it I will document it, but so
far it is elusive.  Yet I have had it happen at least a dozen times in the
last few years.
Do you ever use the monitor mode when you connect to 27339?  Do you ever
use monitor mode to connect to any node?
Chuck

On Fri, Apr 17, 2015 at 4:21 AM, Hugo Escalante <ewplinc at gmail.com> wrote:

> Honestly Tim you shouldn't accused before you have all the facts.
>
> 1. Not going thru anyone's repeater input.
> 2. Duplex set to 1.
> 3. East Coast IRLP Reflector 9050 has a Allstar Node 27339 for there
> Tuesday night nets.
>
> I believe there was a mistake somewhere, because I haven't run across this
> problem
> before and I was blame for it. Thanks for the help guys.
>
> Hugo
> K7HJE
>
>
>
> On Apr 16, 2015, at 11:32 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>
> Are you liking into a repeater’s input, with your node using the repeater
> as a mobile, HT or bast station? I call that in-band linking. If so that’s
> really bad form. The ID is only one of the issues with doing in-band
> linking.
>
> You said something about the East Coast reflector. Is that IRLP or
> Echolink?
>
> Honestly, you should not in-band link and should stop now. And be advised
> that IRLP and Echolink do not want connections from other networks
> including AllStar.
> --
> Tim
> :wq
>
> On Apr 16, 2015, at 6:21 PM, Hugo Escalante <ewplinc at gmail.com> wrote:
>
> Doug,
>
> I just want to get rid of the CW ID, I have received complaints on the
> Node 27339 East Coast Reflector that my CW ID is not permitted.
>
> Hugo
> K7HJE
>
> On Tue, Apr 14, 2015 at 10:50 PM, Doug Crompton <doug at crompton.com> wrote:
>
>> Well if you are using it on a radio an ID is required but I am sure you
>> know that.
>>
>> Do you want to get rid of all ID's or just the cw id?
>>
>> The main cw ID is  the idrecording=  command in rpt.conf
>>
>> idtalkover=      is the ID that is played when someone keys up during the
>> idrecording id.
>>
>> In other words iof you have idrecording set ot a voice ID and idtalkover
>> set to a CW ID then if the voice ID is playing and someone keys up it will
>> immediately switch to the CW ID.
>>
>>
>>
>> *73 DougWA3DSPhttp://www.crompton.com/hamradio
>> <http://www.crompton.com/hamradio>*
>>
>>
>> > From: ewplinc at gmail.com
>> > Date: Tue, 14 Apr 2015 21:24:59 -0400
>> > To: arm-allstar at hamvoip.org
>> > Subject: [arm-allstar] CW ID
>> >
>> >
>> > Any help on getting rid of my CW ID on my AllStar Node.
>> >
>> > Hugo
>> > K7HJE
>> > _______________________________________________
>> >
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB web page -
>> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>> >
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB web page -
>> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB web page -
> http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150417/d3b8352e/attachment.html>