[arm-allstar] CW ID

[Doug Crompton]

Well if you are using it on a radio an ID is required but I am sure you know that.

Do you want to get rid of all ID's or just the cw id?

The main cw ID is  the idrecording=  command in rpt.conf

idtalkover=      is the ID that is played when someone keys up during the idrecording id.

In other words iof you have idrecording set ot a voice ID and idtalkover set to a CW ID then if the voice ID is playing and someone keys up it will immediately switch to the CW ID.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: ewplinc at gmail.com
> Date: Tue, 14 Apr 2015 21:24:59 -0400
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] CW ID
> 
> 
> Any help on getting rid of my CW ID on my AllStar Node.
> 
> Hugo
> K7HJE
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150414/5ba73d0b/attachment.html>