[arm-allstar] help please configuring my first allstar node

[Neil k8it]

no I don’t but the bbb might think its transmitting over the internet. I do understand the inversion of the signal. however I have never ran the radio audio fob setup to choose what parameters I need. how do I run that routine.


From: Robert Newberry 
Sent: Saturday, April 11, 2015 6:46 PM
To: BeagleBone Black ARM Allstar 
Subject: Re: [arm-allstar] help please configuring my first allstar node


Do you have a radio connected to your FOB? If not your simplex node could see your COR line as high and be busy sending audio (dead air) down the network. 

I had this very problem.  With no radio connected the FOB sees a high. My COR is set to usb invert. So a positive COR is a low.

Does that make sense?  If not just let me know and I'll try to explain it better. 



--------------------------------------------------------------------------------


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/ 


--------------------------------------------------------------------------------


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5863 / Virus Database: 4328/9512 - Release Date: 04/11/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150411/f82a4b1d/attachment-0001.html>