[arm-allstar] Voice ID

[Doug Crompton]

The node-config.sh script can be rerun to change settings. All the current settings will be displayed and you can just hit enter at each one to keep the current settings. When you come to the voice ID say you want it using text to speech. Type in the ID you want as the example shows. When done you should have a new voice ID. If you don't like what you hear repeat until you get it right.

Also see the test to speech howto on the web page. Anything referring to the BBB also applies to the RPi2.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sat, 11 Apr 2015 13:25:21 -0400
From: N1XBM at amsat.org
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Voice ID

 I re purposed my BBB to another radio. I ran the first time script.  For the most part everything is ok. Although I hear it still do the voice ID of the old node. I've been looking in the .conf files but I assume the voice ID must be somewhere else. Anyone have any ideas?

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/ 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150411/2fc089de/attachment.html>