[arm-allstar] Network Configuration

[John]

Thanks, Doug. I'm grasping at any possibilities at this point. I have wavered between believing it is a config problem I've created on the BBB or a router configuration error. Three different routers and several days later, I'm still not up and running. I even downloaded the latest distro and began again from scratch to ensure I had a fresh start.  

No operational nodes at this point, so perhaps a landline would be best if you don't mind. Happy to call at your convenience. I'll put together notes on my setup in the morning.  

John

Sent from my iPhone

> On Jul 27, 2014, at 10:32 PM, Doug Crompton <doug at crompton.com> wrote:
> 
> John,
> 
>  I believe those errors can be safely ignored. I will be hooking up my serial cable tomorrow and I will check but as I remember I have seen them on all boots and the network works.
> 
> Can you describe your network issues again?  What router, isp, static or dhcp?  Unless you are setting something wrong in the BBB it should work as it has for everyone else. Perhaps we can sked or talk on the phone. Node 27225 works for me if you have a node that works.
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> Date: Sun, 27 Jul 2014 21:34:52 -0500
> From: wb5nfc at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Network Configuration
> 
> I have been struggling with router and basic network setup for several weeks thinking that I have a major router configuration problem. I finally got USB-serial communication established with my BBB tonight. The following (apparent) errors appear at the very end of the boot process:
> 
> [  OK  ] Started Automatic wired network connection using netctl profiles.
> [    6.203253] libphy: PHY 4a101000.mdio:01 not found
> [    6.208395] net eth0: phy 4a101000.mdio:01 not found on slave 1
>  
> Arch Linux 3.8.13-24-ARCH (ttyO0)
>  
> bbb2186 login: [   11.527052] libphy: PHY 4a101000.mdio:01 not found
> [   11.532149] net eth0: phy 4a101000.mdio:01 not found on slave 1
>  
> Arch Linux 3.8.13-24-ARCH (ttyO0)
>  
> bbb2186 login: root
> Password: xxxxxxx
> BBB Allstar Release Version 1.1 June 25, 2014 WA3DSP
> 
> -------------------------
> 
> What do these error messages mean and how do I correct them?
> 
> Thanks in advance for any guidance you can provide. 
> -- 
> John Kenney
> 
> _______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20140727/5e1bd840/attachment.html>