[arm-allstar] power up

[Mal Good]

Are you using a solid 5v supply?

 

Mal

 

 

  _____  

From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of harry
Sent: Friday, 5 December 2014 12:36 PM
To: 'BeagleBone Black ARM Allstar'
Subject: Re: [arm-allstar] power up

 

One of my boards has trouble starting up . I have to pull the power in and
out lots of times

 

Hr kc4rpp

 

From: arm-allstar-bounces at hamvoip.org
[mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Thursday, December 04, 2014 12:52 PM
To: BeagleBone Black ARM Allstar
Subject: Re: [arm-allstar] power up

 

I just booted my Microcenter board which I received several weeks ago and it
boots fine.

The first question, do the bad boards boot into emmc Debian without the SD
card installed? You do not need to connect anything but power. The boards
should boot - LEDs flashing in different patterns and then the heartbeat led
should flash continuously.

73 Doug
WA3DSP
http://www.crompton.com/hamradio

  _____  

To: arm-allstar at hamvoip.org
From: ke2n at cs.com
Date: Thu, 4 Dec 2014 06:57:55 -0500
Subject: [arm-allstar] power up

Any one else have a BBB Rev C power up problem?

 

http://elinux.org/Beagleboard:BeagleBoneBlack#Improper_Power_Down....All_Rev
isions

 

I got two units from Micro Center and they both have a really hard time
getting started.

One unit I got from Spark Fun works fine every time.

 

Ken

 


_______________________________________________ arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB
web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20141205/0c54bbe2/attachment-0001.html>