[arm-allstar] IAX SHow Channes

[David McGough]

Hi Chuck,

When Asterisk "registers" with the AllStar network, it send UDP packets on 
port 4569 back the the AllStar host servers.  This does not mean that 
inbound connections from the Internet will work, even if the node is 
properly registering! ....A NAT firewall (typical at Hotels, etc.) will 
block all in-bound traffic.  In this scenario, since convincing the Hotel 
to do port forwarding is hopeless, you need to setup a VPN which will 
tunnel thru the NAT and give you a live address, etc.

BTW, does the 900MHz repeater work properly other than not connecting to 
AllStar nodes?

73, David KB4FXC



On Mon, 18 Aug 2014, Chuck Kraly wrote:

> ok,
> I iaxrpt in from a pc and it shows it now.....
> I do not show in the registry on allstarlink, and all the registration is
> correct in the files. What port, does it "phone home" or how does it send
> the info to allstar?
> 
> 
> On Mon, Aug 18, 2014 at 6:09 PM, Doug Crompton <doug at crompton.com> wrote:
> 
> > Are you using wifi on the BBB? Are you using DHCP? What does ifconfig
> > show? Can you ping anywhere? Does it register? in client - 'iax2 show
> > registry'
> >
> > You are only going to have a channel showing if you connect to somewhere.
> > Can you connect to anywhere?
> > 'iax2 show channels' would show the connection. More information is needed.
> >
> >
> >
> >
> > *73 DougWA3DSPhttp://www.crompton.com/hamradio
> > <http://www.crompton.com/hamradio>*
> >
> >
> > ------------------------------
> > Date: Mon, 18 Aug 2014 17:46:04 -0700
> > From: k0xm at byrg.net
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] IAX SHow Channes
> >
> >
> > Yes.
> > We took a fully operational node in a portable 900Mhz rptr. with all
> > levels set, i came to SD, it up on the hote wifi and nothing. I do have a
> > firewall issue but  core show channels does not show an iax channel
> >
> >
> > On Mon, Aug 18, 2014 at 5:41 PM, David McGough <kb4fxc at inttek.net> wrote:
> >
> >
> > Hi Chuck,
> >
> > I don't quite understand what's wrong? ....Did you take a working BBB with
> > you to SD and can't get it working there?
> >
> > 73, David KB4FXC
> >
> >
> > On Mon, 18 Aug 2014, Chuck Kraly wrote:
> >
> > > Ok guys,
> > > I had this node working flawlessly at home. Came to San Diego, could not
> > > connect, or show on the list. Core show iax shows no active
> > > channel......any ideas?
> > >
> > >
> > >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB web page -
> > http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> >
> >
> >
> >
> > --
> > Chuck K0XM
> > Backyard Repeater Group
> > k0xm at byrg.net
> >
> > _______________________________________________ arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> > BBB web page - http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB web page -
> > http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/
> >
> 
> 
> 
>