[Arm-allstar-irlp] Brand new with Allstar Host name does not resolve outgoing ports not forwarded

[Darrell Wilkinson]

Check your IRLP node # all node# are 4 digits I only see 3

On Thu, May 23, 2019, 7:09 PM "Glenn Maclean via ARM-allstar-irlp" <
arm-allstar-irlp at hamvoip.org> wrote:

> Hi,
> I am very new to Allstar and just got my node up and running. I was able
> to get Echolink to work without issue and Allstar node seems to be working.
> When I run the IRLP troubleshooting script as user repeater I am getting
> two errors.
> 1. Ports 873, 8873,10000, 15425,15426,15427 do not work outbound
>
> 2. Your node’s hostname does not resolve
>
> I am using an ATT router with the raspberry pi IP address in the DMZ.
> Using DHCP I had not issues what so ever with the original IRLP raspberry
> pi with the IRLP board using the same router with the raspberry pi in the
> DMZ using DHCP. There is no issue with the router, I have triple checked
> the environment file and the call and IRLP node numbers are there in lower
> case! The hosts file is also configured correctly. Here is my hosts file:
>
> #
> # /etc/hosts: static lookup table for host names
> #<ip-address>           <hostname.domain.org <http://hostname.domain.org/>>
>            <hostname
> 127.0.0.1               localhost
> 127.0.0.1               localhost.localdomain   localhost
> 127.0.0.1               config.allstarlinl.org <
> http://config.allstarlinl.org/>
> 127.0.0.1               stn388
> #: : 1
>
> #End of file
>
> Any help would be much appreciated!
>
> Thank you,
> Glenn Maclean WA7SPY
> _______________________________________________
> ARM-allstar-irlp mailing list
> ARM-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
>