[Arm-allstar-irlp] Problems connecting to IRLP reflectors

Gerry Filby gerf at gerf.com
Tue May 14 14:21:53 EDT 2019


I don't use IRLP a whole lot, but just noticed that I can't connect to 
any of the reflectors - the connection times out.

I CAN connect to 89999 and the transmit and playback works fine.

I've double checked the configuration per the how-to document and all 
seems fine - including port forwarding at my firewall.

It used to work and nothing has changed in many months.

Below is the contents of the IRLP log if it's any help.

My station # is stn3366.

Any ideas ?

Gerry
W6WNG


File: /home/irlp/log/messages
-----------------------------------------------------------------
Tue May 14 10:44:45 PDT 2019 [update:hosts] Gzipped file was 
unavailable, downloading hosts.update direct.
Tue May 14 10:44:45 PDT 2019 [update:hosts] ERROR: Hosts file seems invalid.
Tue May 14 10:44:45 PDT 2019 [update:hosts] Update completed.
Tue May 14 10:44:55 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 10:44:56 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 10:45:11 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 10:45:11 PDT 2019 [connect_to_reflector] Reflector 
ref910/Ch-9 CODEC chosen is UNCOMP.
Tue May 14 10:45:13 PDT 2019 [update:hosts] Update completed.
Tue May 14 10:45:49 PDT 2019 [failure] timeout connect
Tue May 14 10:45:50 PDT 2019 [irlp_reset] Reset completed.
Tue May 14 10:46:12 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 10:46:12 PDT 2019 [connect_to_reflector] Reflector 
ref922/Ch-9 CODEC chosen is GSM.
Tue May 14 10:46:28 PDT 2019 [failure] timeout connect
Tue May 14 10:46:28 PDT 2019 [irlp_reset] Reset completed.
Tue May 14 10:47:26 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 10:47:26 PDT 2019 [connect_to_reflector] Reflector 
ref910/Ch-0 CODEC chosen is UNCOMP.
Tue May 14 10:47:42 PDT 2019 [failure] timeout connect
Tue May 14 10:47:42 PDT 2019 [irlp_reset] Reset completed.
Tue May 14 10:48:57 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 10:48:57 PDT 2019 [connect_to_reflector] Reflector 
ref999/Ch-9 CODEC chosen is ADPCM.
Tue May 14 10:48:58 PDT 2019 [connect_to_reflector] Timeout is disabled.
Tue May 14 10:48:58 PDT 2019 [connect_to_reflector] Node Connected to 
base reflector ref999/Ch-9
Tue May 14 10:49:59 PDT 2019 [end] Node Disconnect from ref9999
Tue May 14 10:50:14 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 10:50:14 PDT 2019 [connect_to_reflector] Reflector 
ref910/Ch-0 CODEC chosen is UNCOMP.
Tue May 14 10:50:29 PDT 2019 [failure] timeout connect
Tue May 14 10:50:30 PDT 2019 [irlp_reset] Reset completed.
Tue May 14 11:12:29 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 11:12:29 PDT 2019 [connect_to_reflector] Reflector 
ref910/Ch-0 CODEC chosen is UNCOMP.
Tue May 14 11:12:45 PDT 2019 [failure] timeout connect
Tue May 14 11:12:45 PDT 2019 [irlp_reset] Reset completed.
Tue May 14 11:13:08 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 11:13:08 PDT 2019 [connect_to_reflector] Reflector 
ref910/Ch-9 CODEC chosen is UNCOMP.
Tue May 14 11:13:24 PDT 2019 [failure] timeout connect
Tue May 14 11:13:25 PDT 2019 [irlp_reset] Reset completed.
Tue May 14 11:14:30 PDT 2019 [irlp_fullreset] Full Reset completed.
Tue May 14 11:14:30 PDT 2019 [connect_to_reflector] Reflector 
ref960/Ch-0 CODEC chosen is UNCOMP.
Tue May 14 11:14:46 PDT 2019 [failure] timeout connect
Tue May 14 11:14:46 PDT 2019 [irlp_reset] Reset completed.


More information about the ARM-allstar-irlp mailing list