[Arm-allstar-irlp] Outbound ports and hostname

[Paul - KN2R]

Steve,

You must wait at least 20 seconds after disconnecting from one IRLP node before connecting to another.  This is why our previous node is still connected, you are dialing too soon..

Paul / KN2R


-----Original Message-----
From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of "srogers via ARM-allstar-irlp"
Sent: Thursday, February 07, 2019 2:10 AM
To: ARM-allstar-irlp at hamvoip.org
Cc: srogers
Subject: [Arm-allstar-irlp] Outbound ports and hostname

Well after posting my prior question about the telemetry I have discovered some issues.  It seems several ports are being blocked outbound and the hostname can not resolve..error in the hosts file.  This is not a router issue as the irlp works without issue on the original pc installation without issue.  If I connect to a reflector (ie 9210) it seems to work correctly.  I can then disconnect and connect to another (ie 9050) and again all seems normal except that when I transmit to the now connected reflector (9050) it is actually sending audio to the previous reflector.  This behavior is repeatable no matter which node or reflector is used.
I'm happy to run tests, post logs, files etc if anyone has any ideas.
Steve


Sent from my Verizon, Samsung Galaxy smartphone _______________________________________________
ARM-allstar-irlp mailing list
ARM-allstar-irlp at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp