From srogers at epbfi.com Wed Feb 6 22:52:42 2019 From: srogers at epbfi.com (srogers at epbfi.com) Date: Wed, 6 Feb 2019 22:52:42 -0500 (EST) Subject: [Arm-allstar-irlp] Telemetry Message-ID: <2023318324.63204213.1549511562549.JavaMail.zimbra@epbfi.com> Just added IRLP to the system...All went well and is working great. I have a question with regard to telemetry (connect/disconnect, courtesy tones, ID's etc)..I'm pretty sure I know the answer, but want to double check. If I'm connected to an IRLP node and an Allstar node connects to me...Will the Allstar connect message go out to IRLP? My thinking is that telemetry from one platform does not go to the other, but again just wanting to double check. Thanks Steve From srogers at epbfi.com Thu Feb 7 02:09:54 2019 From: srogers at epbfi.com (srogers) Date: Thu, 07 Feb 2019 02:09:54 -0500 Subject: [Arm-allstar-irlp] Outbound ports and hostname Message-ID: Well after posting my prior question about the telemetry I have discovered some issues.? It seems several ports are being blocked outbound and the hostname can not resolve..error in the hosts file.? This is not a router issue as the irlp works without issue on the original pc installation without issue.? If I connect to a reflector (ie 9210) it seems to work correctly.? I can then disconnect and connect to another (ie 9050) and again all seems normal except that when I transmit to the now connected reflector (9050) it is actually sending audio to the previous reflector.? This behavior is repeatable no matter which node or reflector is used. I'm happy to run tests, post logs, files etc if anyone has any ideas. Steve Sent from my Verizon, Samsung Galaxy smartphone From paulkn2r at gmail.com Thu Feb 7 07:53:12 2019 From: paulkn2r at gmail.com (Paul - KN2R) Date: Thu, 7 Feb 2019 07:53:12 -0500 Subject: [Arm-allstar-irlp] Outbound ports and hostname In-Reply-To: <20190207071000.5FD62A000AD@newplesk.inttek.net> References: <20190207071000.5FD62A000AD@newplesk.inttek.net> Message-ID: <00aa01d4bee4$15f27860$41d76920$@com> Steve, You must wait at least 20 seconds after disconnecting from one IRLP node before connecting to another. This is why our previous node is still connected, you are dialing too soon.. Paul / KN2R -----Original Message----- From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of "srogers via ARM-allstar-irlp" Sent: Thursday, February 07, 2019 2:10 AM To: ARM-allstar-irlp at hamvoip.org Cc: srogers Subject: [Arm-allstar-irlp] Outbound ports and hostname Well after posting my prior question about the telemetry I have discovered some issues. It seems several ports are being blocked outbound and the hostname can not resolve..error in the hosts file. This is not a router issue as the irlp works without issue on the original pc installation without issue. If I connect to a reflector (ie 9210) it seems to work correctly. I can then disconnect and connect to another (ie 9050) and again all seems normal except that when I transmit to the now connected reflector (9050) it is actually sending audio to the previous reflector. This behavior is repeatable no matter which node or reflector is used. I'm happy to run tests, post logs, files etc if anyone has any ideas. Steve Sent from my Verizon, Samsung Galaxy smartphone _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp From russell at kv4s.com Thu Feb 7 15:43:38 2019 From: russell at kv4s.com (Russell Thomas) Date: Thu, 7 Feb 2019 14:43:38 -0600 Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases Message-ID: I'm running the Yellow box with IRLP as well. >From time to time the audio level will drop on recieve like the volume was turned down. Later it will come back normally. seems to be worse the hotter the nodes gets. It seems to only do it on IRLP not Allstar. has anyone else experienced this? ideas on how to fix? 73, Russell Thomas, KV4S Cell: 205.202.1701 Web: http://KV4S.com From celltech161 at gmail.com Thu Feb 7 15:48:43 2019 From: celltech161 at gmail.com (Justin Reed) Date: Thu, 7 Feb 2019 14:48:43 -0600 Subject: [Arm-allstar-irlp] How to remove IRLP Message-ID: Is there a procedure for removing the IRLP package from Hamvoip? I'm wanting to remove it from a radio-less hub that is not convenient to get to. Thanks, Justin NV8Q From paulkn2r at gmail.com Thu Feb 7 16:03:01 2019 From: paulkn2r at gmail.com (Paul - KN2R) Date: Thu, 7 Feb 2019 16:03:01 -0500 Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases In-Reply-To: References: Message-ID: <00b201d4bf28$833d0b80$89b72280$@com> Yes, this only happens using the ADCPM codec. It is on Dave's list to fix. -----Original Message----- From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of "Russell Thomas via ARM-allstar-irlp" Sent: Thursday, February 07, 2019 3:44 PM To: arm-allstar-irlp at hamvoip.org Cc: Russell Thomas Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases I'm running the Yellow box with IRLP as well. >From time to time the audio level will drop on recieve like the volume was turned down. Later it will come back normally. seems to be worse the hotter the nodes gets. It seems to only do it on IRLP not Allstar. has anyone else experienced this? ideas on how to fix? 73, Russell Thomas, KV4S Cell: 205.202.1701 Web: http://KV4S.com _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp From nj3h at yahoo.com Thu Feb 7 16:47:34 2019 From: nj3h at yahoo.com (George) Date: Thu, 7 Feb 2019 21:47:34 +0000 (UTC) Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases In-Reply-To: <00b201d4bf28$833d0b80$89b72280$@com> References: <00b201d4bf28$833d0b80$89b72280$@com> Message-ID: <1874268601.9224.1549576054503@mail.yahoo.com> Whete would one find out which codec they are using? Regards, George, NJ3H Redmond, Oregon USA DMR Node: 3141315 Allstar Node: 49246 Echolink Node NJ3H-L: 3135 IRLP Node: 3659 On Thu, Feb 7, 2019 at 12:53, Paul - KN2R via ARM-allstar-irlp wrote: Yes, this only happens using the ADCPM codec. It is on Dave's list to fix. -----Original Message----- From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of "Russell Thomas via ARM-allstar-irlp" Sent: Thursday, February 07, 2019 3:44 PM To: arm-allstar-irlp at hamvoip.org Cc: Russell Thomas Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases I'm running the Yellow box with IRLP as well. >From time to time the audio level will drop on recieve like the volume was turned down. Later it will come back normally. seems to be worse the hotter the nodes gets. It seems to only do it on IRLP not Allstar. has anyone else experienced this? ideas on how to fix? 73, Russell Thomas, KV4S Cell: 205.202.1701 Web: http://KV4S.com _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp From paulkn2r at gmail.com Fri Feb 8 09:43:33 2019 From: paulkn2r at gmail.com (Paul - KN2R) Date: Fri, 8 Feb 2019 09:43:33 -0500 Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases In-Reply-To: <1874268601.9224.1549576054503@mail.yahoo.com> References: <00b201d4bf28$833d0b80$89b72280$@com> <1874268601.9224.1549576054503@mail.yahoo.com> Message-ID: <00cf01d4bfbc$aab59210$0020b630$@com> George, After in IRLP connection is established, just view the contents of this file: /var/log/irlp/local/codec Paul / KN2R -----Original Message----- From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of "George via ARM-allstar-irlp" Sent: Thursday, February 07, 2019 4:48 PM To: arm-allstar-irlp at hamvoip.org Cc: George Subject: Re: [Arm-allstar-irlp] IRLP audio volume randomly decreases Whete would one find out which codec they are using? Regards, George, NJ3H Redmond, Oregon USA DMR Node: 3141315 Allstar Node: 49246 Echolink Node NJ3H-L: 3135 IRLP Node: 3659 On Thu, Feb 7, 2019 at 12:53, Paul - KN2R via ARM-allstar-irlp wrote: Yes, this only happens using the ADCPM codec. It is on Dave's list to fix. -----Original Message----- From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of "Russell Thomas via ARM-allstar-irlp" Sent: Thursday, February 07, 2019 3:44 PM To: arm-allstar-irlp at hamvoip.org Cc: Russell Thomas Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases I'm running the Yellow box with IRLP as well. >From time to time the audio level will drop on recieve like the volume was turned down. Later it will come back normally. seems to be worse the hotter the nodes gets. It seems to only do it on IRLP not Allstar. has anyone else experienced this? ideas on how to fix? 73, Russell Thomas, KV4S Cell: 205.202.1701 Web: http://KV4S.com _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp From ynotssor at yahoo.com Wed Feb 13 12:29:27 2019 From: ynotssor at yahoo.com (Tony Ross) Date: Wed, 13 Feb 2019 09:29:27 -0800 Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases In-Reply-To: <1874268601.9224.1549576054503@mail.yahoo.com> References: <00b201d4bf28$833d0b80$89b72280$@com> <1874268601.9224.1549576054503@mail.yahoo.com> Message-ID: Using supermon, click "IRLP Log" after a connection and you'll see something like: ... Wed Feb 13 09:24:07 PST 2019 [connect_to_reflector] Reflector ref907/Ch-5 CODEC chosen is ADPCM. ... On 2/7/19 1:47 PM, "George via ARM-allstar-irlp" wrote: > Whete would one find out which codec they are using? > > Regards, > George, NJ3H > Redmond, Oregon USA > DMR Node: 3141315 > Allstar Node: 49246 > Echolink Node NJ3H-L: 3135 > IRLP Node: 3659 > > > On Thu, Feb 7, 2019 at 12:53, Paul - KN2R via ARM-allstar-irlp wrote: Yes, this only happens using the ADCPM codec. > It is on Dave's list to fix. > > > -----Original Message----- > From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On > Behalf Of "Russell Thomas via ARM-allstar-irlp" > Sent: Thursday, February 07, 2019 3:44 PM > To: arm-allstar-irlp at hamvoip.org > Cc: Russell Thomas > Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases > > I'm running the Yellow box with IRLP as well. > > >From time to time the audio level will drop on recieve like the volume was > turned down. Later it will come back normally. seems to be worse the hotter > the nodes gets. It seems to only do it on IRLP not Allstar. > > has anyone else experienced this? ideas on how to fix? > > 73, > Russell Thomas, KV4S > Cell: 205.202.1701 > Web: http://KV4S.com > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > From ynotssor at yahoo.com Wed Feb 13 12:35:49 2019 From: ynotssor at yahoo.com (Tony Ross) Date: Wed, 13 Feb 2019 09:35:49 -0800 Subject: [Arm-allstar-irlp] How to remove IRLP In-Reply-To: References: Message-ID: If it was installed with pacman, it can be removed with pacman; see the IRLP How-to and "man pacman". On 2/7/19 12:48 PM, "Justin Reed via ARM-allstar-irlp" wrote: > Is there a procedure for removing the IRLP package from Hamvoip? > > I'm wanting to remove it from a radio-less hub that is not convenient > to get to. > > Thanks, > Justin > > NV8Q > > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > From nj3h at yahoo.com Wed Feb 13 12:45:45 2019 From: nj3h at yahoo.com (George) Date: Wed, 13 Feb 2019 17:45:45 +0000 (UTC) Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases In-Reply-To: References: <00b201d4bf28$833d0b80$89b72280$@com> <1874268601.9224.1549576054503@mail.yahoo.com> Message-ID: <1176741408.374475.1550079945229@mail.yahoo.com> Thanks Tony. I appreciate the info.? Regards, George, NJ3H Redmond, Oregon USA DMR Node: 3141315 Allstar Node: 49246 Echolink Node NJ3H-L: 3135 IRLP Node: 3659 On Wed, Feb 13, 2019 at 9:29, Tony Ross via ARM-allstar-irlp wrote: Using supermon, click "IRLP Log" after a connection and you'll see something like: ... Wed Feb 13 09:24:07 PST 2019 [connect_to_reflector] Reflector ref907/Ch-5 CODEC chosen is ADPCM. ... On 2/7/19 1:47 PM, "George via ARM-allstar-irlp" wrote: > Whete would one find out which codec they are using? > > Regards, > George, NJ3H > Redmond, Oregon USA > DMR Node: 3141315 > Allstar Node: 49246 > Echolink Node NJ3H-L: 3135 > IRLP Node: 3659 >? >? >? ? On Thu, Feb 7, 2019 at 12:53, Paul - KN2R via ARM-allstar-irlp wrote:? Yes, this only happens using the ADCPM codec. > It is on Dave's list to fix. > > > -----Original Message----- > From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On > Behalf Of "Russell Thomas via ARM-allstar-irlp" > Sent: Thursday, February 07, 2019 3:44 PM > To: arm-allstar-irlp at hamvoip.org > Cc: Russell Thomas > Subject: [Arm-allstar-irlp] IRLP audio volume randomly decreases > > I'm running the Yellow box with IRLP as well. > > >From time to time the audio level will drop on recieve like the volume was > turned down. Later it will come back normally. seems to be worse the hotter > the nodes gets. It seems to only do it on IRLP not Allstar. > > has anyone else experienced this? ideas on how to fix? > > 73, > Russell Thomas, KV4S > Cell: 205.202.1701 > Web: http://KV4S.com > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp >? ? > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp From ian at vk2hk.com Wed Feb 20 19:31:00 2019 From: ian at vk2hk.com (Ian (VK2HK)) Date: Thu, 21 Feb 2019 11:31:00 +1100 Subject: [Arm-allstar-irlp] IRLP Echolink Port issue on new hamviop image Message-ID: Hi all, first of all these are my first builds and use of the Hamvoip Pi Image and I have now spent more than a week trying and testing different options but cannot get this port problem sorted. First off what I am trying to do is replace a working early Centos AllStarLink server that has both IRLP and Echolink on it and as I said working plus another working EchoIRLP Pi. Now the reason for this is that the Centos server is getting old and I?m seeing some issues on the old hard drive (yes full backup has been done) I?m also trying to get the other EchoIRLP Pi onto a hamvoip system. The problem I am having is that after the new image is installed and configured including the IRLP key transferred, I cannot get either Echolink or IRLP to work, they don?t exist on the database and if I try to connect from them to anything, they won?t connect nor can I connect from another external node to them. I have removed the existing systems from my network and have set up the new hamvoip Pi?s with the same IP address and the same GW, so that all the existing port forwarding from the routers stay the same. I have multiple Public IP?s and Routers so there is no port or IP conflicts. If I log into either of the hamvoip Pi?s and run the troubleshoot-irlp program I get the following errors (screenshot attached) If I check the log these are some of the errors showing in regards to connecting to the echolink servers, ERROR[359] chan_echolink.c: Unable to connect to directory server server5.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on server3.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on oceania.echolink.org ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org ERROR[359] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org ERROR[359] chan_echolink.c: Unable to connect to directory server server5.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on server3.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on oceania.echolink.org ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org The hamviop images are running on Pi3B+ but I have also tried on Pi2 with the same errors. The next test I ran was to create a basic Debian9 Pi image and ran a python script to open the same ports required using the same Pi?s and the same IP, GW etc and when I check netstat it shows all open and when I do a port open check from the internet on a totally different external network, I can see each port open as it should be and if I replace them with my original Centos system and my original EchoIRLP Pi again they show as open, but if I run that same test when the hamvoip Pi's are connect and running it shows them as closed. I?m hoping someone can point me in the right direction as to why I am having this problem and again hopefully be able fix this. ------------------ Regards Ian (VK2HK) From k4fxc at pcrn.net Wed Feb 20 19:42:28 2019 From: k4fxc at pcrn.net (David McGough) Date: Wed, 20 Feb 2019 19:42:28 -0500 (EST) Subject: [Arm-allstar-irlp] IRLP Echolink Port issue on new hamviop image In-Reply-To: Message-ID: Hi Ian, The issue with echolink, based on the errors below, is most likely a bad node= or pwd= config statement in your /etc/asterisk/echolink.conf file. Confirm that your echolink node number and password are correct. 73, David K4FXC On Thu, 21 Feb 2019, "Ian (VK2HK) via ARM-allstar-irlp" wrote: > Hi all, first of all these are my first builds and use of the Hamvoip Pi Image and I have now spent more than a week trying and testing different options but cannot get this port problem sorted. First off what I am trying to do is replace a working early Centos AllStarLink server that has both IRLP and Echolink on it and as I said working plus another working EchoIRLP Pi. Now the reason for this is that the Centos server is getting old and I???m seeing some issues on the old hard drive (yes full backup has been done) I???m also trying to get the other EchoIRLP Pi onto a hamvoip system. The problem I am having is that after the new image is installed and configured including the IRLP key transferred, I cannot get either Echolink or IRLP to work, they don???t exist on the database and if I try to connect from them to anything, they won???t connect nor can I connect from another external node to them. I have removed the existing systems from my network and have set up the new hamvoip Pi???s with the same IP address and the same GW, so that all the existing port forwarding from the routers stay the same. I have multiple Public IP???s and Routers so there is no port or IP conflicts. If I log into either of the hamvoip Pi???s and run the troubleshoot-irlp program I get the following errors (screenshot attached) If I check the log these are some of the errors showing in regards to connecting to the echolink servers, ERROR[359] chan_echolink.c: Unable to connect to directory server server5.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on server3.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on oceania.echolink.org ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org ERROR[359] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org ERROR[359] chan_echolink.c: Unable to connect to directory server server5.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on server3.echolink.org ERROR[359] chan_echolink.c: Error in parsing header on oceania.echolink.org ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org The hamviop images are running on Pi3B+ but I have also tried on Pi2 with the same errors. The next test I ran was to create a basic Debian9 Pi image and ran a python script to open the same ports required using the same Pi???s and the same IP, GW etc and when I check netstat it shows all open and when I do a port open check from the internet on a totally different external network, I can see each port open as it should be and if I replace them with my original Centos system and my original EchoIRLP Pi again they show as open, but if I run that same test when the hamvoip Pi's are connect and running it shows them as closed. I???m hoping someone can point me in the right direction as to why I am having this problem and again hopefully be able fix this. ------------------ Regards Ian (VK2HK) _______________________________________________ ARM-allstar-irlp mailing list ARM-allstar-irlp at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp From ian at vk2hk.com Wed Feb 20 20:49:17 2019 From: ian at vk2hk.com (Ian (VK2HK)) Date: Thu, 21 Feb 2019 12:49:17 +1100 Subject: [Arm-allstar-irlp] IRLP Echolink Port issue on new hamviop image In-Reply-To: References: Message-ID: <8A5B698E-680F-4571-B4E4-02108BD1AAAD@vk2hk.com> Thank you David, you are correct, it was my password, different passwords for each one and I had them transposed on each Pi, at least I can now continue to see what else is going wrong with the rest of the port forwarding issues, still having problems with the IRLP side, but I will now go back over each setting and make sure I have not made a similar error in those config files. I think I had spent to much time looking and could not see what was in front of me. ------------------ Regards Ian (VK2HK) > On 21 Feb 2019, at 11:42 am, David McGough wrote: > > > Hi Ian, > > The issue with echolink, based on the errors below, is most likely a bad > node= or pwd= config statement in your /etc/asterisk/echolink.conf file. > > Confirm that your echolink node number and password are correct. > > > 73, David K4FXC > > > On Thu, 21 Feb 2019, "Ian (VK2HK) via ARM-allstar-irlp" wrote: > >> Hi all, first of all these are my first builds and use of the Hamvoip Pi Image and I have now spent more than a week trying and testing different options but cannot get this port problem sorted. > > First off what I am trying to do is replace a working early Centos AllStarLink server that has both IRLP and Echolink on it and as I said working plus another working EchoIRLP Pi. Now the reason for this is that the Centos server is getting old and I???m seeing some issues on the old hard drive (yes full backup has been done) I???m also trying to get the other EchoIRLP Pi onto a hamvoip system. > > The problem I am having is that after the new image is installed and configured including the IRLP key transferred, I cannot get either Echolink or IRLP to work, they don???t exist on the database and if I try to connect from them to anything, they won???t connect nor can I connect from another external node to them. > I have removed the existing systems from my network and have set up the new hamvoip Pi???s with the same IP address and the same GW, so that all the existing port forwarding from the routers stay the same. I have multiple Public IP???s and Routers so there is no port or IP conflicts. > > If I log into either of the hamvoip Pi???s and run the troubleshoot-irlp program I get the following errors (screenshot attached) > > > > If I check the log these are some of the errors showing in regards to connecting to the echolink servers, > > ERROR[359] chan_echolink.c: Unable to connect to directory server server5.echolink.org > ERROR[359] chan_echolink.c: Error in parsing header on server3.echolink.org > ERROR[359] chan_echolink.c: Error in parsing header on oceania.echolink.org > ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org > ERROR[359] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org > ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org > ERROR[359] chan_echolink.c: Unable to connect to directory server server5.echolink.org > ERROR[359] chan_echolink.c: Error in parsing header on server3.echolink.org > ERROR[359] chan_echolink.c: Error in parsing header on oceania.echolink.org > ERROR[357] chan_echolink.c: connect() failed to connect to the Echolink server server5.echolink.org > > The hamviop images are running on Pi3B+ but I have also tried on Pi2 with the same errors. > > The next test I ran was to create a basic Debian9 Pi image and ran a python script to open the same ports required using the same Pi???s and the same IP, GW etc and when I check netstat it shows all open and when I do a port open check from the internet on a totally different external network, I can see each port open as it should be and if I replace them with my original Centos system and my original EchoIRLP Pi again they show as open, but if I run that same test when the hamvoip Pi's are connect and running it shows them as closed. > > I???m hoping someone can point me in the right direction as to why I am having this problem and again hopefully be able fix this. > > > ------------------ > Regards > Ian (VK2HK) > > > > > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > From rf37797 at gmail.com Thu Feb 28 08:22:40 2019 From: rf37797 at gmail.com (Ronald Foster) Date: Thu, 28 Feb 2019 07:22:40 -0600 Subject: [Arm-allstar-irlp] Unable to link to REF9100 or any WinSystem Allstar hubs Message-ID: Suddenly, I haven't been able to link to IRLP REF9100 or any WinSystem AllStar hubs. Oddly enough, I can link to any of the channels on REF9100 other than "0". I have no trouble links to any other IRLP reflector. I haven't received any email from the WinSystem operators about being blocked. It isn't the end-of-the-world not being able to link to 9100, but the Allstar hubs? 73 Ron, K0AAJ From ynotssor at yahoo.com Thu Feb 28 15:45:36 2019 From: ynotssor at yahoo.com (Tony Ross) Date: Thu, 28 Feb 2019 12:45:36 -0800 Subject: [Arm-allstar-irlp] Unable to link to REF9100 or any WinSystem Allstar hubs In-Reply-To: References: Message-ID: <96610b25-2c37-49fc-9d59-af5dfa69aa69@yahoo.com> 89100 via supermon connects fine here. What clues do you find in /var/log/asterisk/connectlog ? On 2/28/19 5:22 AM, "Ronald Foster via ARM-allstar-irlp" wrote: > Suddenly, I haven't been able to link to IRLP REF9100 or any WinSystem > AllStar hubs. > > Oddly enough, I can link to any of the channels on REF9100 other than "0". > > I have no trouble links to any other IRLP reflector. > > I haven't received any email from the WinSystem operators about being > blocked. > > It isn't the end-of-the-world not being able to link to 9100, but the > Allstar hubs? > > 73 > > Ron, K0AAJ > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > From rf37797 at gmail.com Thu Feb 28 16:11:27 2019 From: rf37797 at gmail.com (Ronald Foster) Date: Thu, 28 Feb 2019 15:11:27 -0600 Subject: [Arm-allstar-irlp] Unable to link to REF9100 or any WinSystem Allstar hubs In-Reply-To: <96610b25-2c37-49fc-9d59-af5dfa69aa69@yahoo.com> References: <96610b25-2c37-49fc-9d59-af5dfa69aa69@yahoo.com> Message-ID: I bounced my router and now I am able connect to both. Apparently, there was a problem in the router. I?ve had some issues with it since a firmware update. There wasn?t any clues in the connectlog. Thanks. On Thu, Feb 28, 2019 at 2:45 PM "Tony Ross via ARM-allstar-irlp" < arm-allstar-irlp at hamvoip.org> wrote: > 89100 via supermon connects fine here. What clues do you find in > /var/log/asterisk/connectlog ? > > On 2/28/19 5:22 AM, "Ronald Foster via ARM-allstar-irlp" wrote: > > Suddenly, I haven't been able to link to IRLP REF9100 or any WinSystem > > AllStar hubs. > > > > Oddly enough, I can link to any of the channels on REF9100 other than > "0". > > > > I have no trouble links to any other IRLP reflector. > > > > I haven't received any email from the WinSystem operators about being > > blocked. > > > > It isn't the end-of-the-world not being able to link to 9100, but the > > Allstar hubs? > > > > 73 > > > > Ron, K0AAJ > > _______________________________________________ > > ARM-allstar-irlp mailing list > > ARM-allstar-irlp at hamvoip.org > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp > > > > _______________________________________________ > ARM-allstar-irlp mailing list > ARM-allstar-irlp at hamvoip.org > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp >