From ka5tkn at suddenlink.net  Sun Nov 25 13:16:02 2018
From: ka5tkn at suddenlink.net (Glenn)
Date: Sun, 25 Nov 2018 12:16:02 -0600
Subject: [Arm-allstar-irlp] connection failed
Message-ID: <a927a6f4-d3bf-3bbb-f517-1c386b7ab69f@suddenlink.net>

Hi folks, My desktop crashed back in January. I was not going to try and 
fix it as the mother board was bad. So loaded up on a PI-3. Finally 
found a backup of the secring.pgp. Things worked fine till about 2 weeks 
ago I decided to make a backup copy of the MicroSD card.
Well screwed that up so now have to start over.? Now every thing works 
except IRLP.
 ?This is what I get in the IRLP log
Sun Nov 25 11:03:41 CST 2018 [irlp_fullreset] Full Reset completed.

Sun Nov 25 11:03:41 CST 2018 [connect_to_reflector] Reflector ref905/Ch-0 CODEC chosen is UNCOMP.
Sun Nov 25 11:03:42 CST 2018 [connect_to_reflector] Timeout is disabled.
Sun Nov 25 11:03:42 CST 2018 [connect_to_reflector] Node Connected to base reflector ref905/Ch-0
Sun Nov 25 11:04:06 CST 2018 [end] Node Disconnect from ref9050

I am missing something..



From tpwaterman at gmail.com  Sun Nov 25 21:44:51 2018
From: tpwaterman at gmail.com (Pres W)
Date: Sun, 25 Nov 2018 21:44:51 -0500
Subject: [Arm-allstar-irlp] connection failed
In-Reply-To: <a927a6f4-d3bf-3bbb-f517-1c386b7ab69f@suddenlink.net>
References: <a927a6f4-d3bf-3bbb-f517-1c386b7ab69f@suddenlink.net>
Message-ID: <CA+GXqdArLj6EMQmnLuOZDRUfyccOgpJp+RE3ZajeM5352GD+2w@mail.gmail.com>

Glenn,

Are your port-forwards currently correct?

-Pres W2PW
On Sun, Nov 25, 2018 at 1:16 PM "Glenn via ARM-allstar-irlp"
<arm-allstar-irlp at hamvoip.org> wrote:
>
> Hi folks, My desktop crashed back in January. I was not going to try and
> fix it as the mother board was bad. So loaded up on a PI-3. Finally
> found a backup of the secring.pgp. Things worked fine till about 2 weeks
> ago I decided to make a backup copy of the MicroSD card.
> Well screwed that up so now have to start over.  Now every thing works
> except IRLP.
>   This is what I get in the IRLP log
> Sun Nov 25 11:03:41 CST 2018 [irlp_fullreset] Full Reset completed.
>
> Sun Nov 25 11:03:41 CST 2018 [connect_to_reflector] Reflector ref905/Ch-0 CODEC chosen is UNCOMP.
> Sun Nov 25 11:03:42 CST 2018 [connect_to_reflector] Timeout is disabled.
> Sun Nov 25 11:03:42 CST 2018 [connect_to_reflector] Node Connected to base reflector ref905/Ch-0
> Sun Nov 25 11:04:06 CST 2018 [end] Node Disconnect from ref9050
>
> I am missing something..
>
> _______________________________________________
> ARM-allstar-irlp mailing list
> ARM-allstar-irlp at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp


From paulkn2r at gmail.com  Mon Nov 26 07:22:15 2018
From: paulkn2r at gmail.com (Paul - KN2R)
Date: Mon, 26 Nov 2018 07:22:15 -0500
Subject: [Arm-allstar-irlp] connection failed
In-Reply-To: <a927a6f4-d3bf-3bbb-f517-1c386b7ab69f@suddenlink.net>
References: <a927a6f4-d3bf-3bbb-f517-1c386b7ab69f@suddenlink.net>
Message-ID: <025a01d48582$ab5f4fe0$021defa0$@com>

Hi Glenn,

You may want to check your firewall port forwarding for IRLP and make sure your rules are pointing to the IP for the new RPi.
Also be sure to follow step by step the IRLP Setup Howto document?

Paul / KN2R



-----Original Message-----
From: ARM-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of "Glenn via ARM-allstar-irlp"
Sent: Sunday, November 25, 2018 1:16 PM
To: arm-allstar-irlp at hamvoip.org
Cc: Glenn
Subject: [Arm-allstar-irlp] connection failed

Hi folks, My desktop crashed back in January. I was not going to try and fix it as the mother board was bad. So loaded up on a PI-3. Finally found a backup of the secring.pgp. Things worked fine till about 2 weeks ago I decided to make a backup copy of the MicroSD card.
Well screwed that up so now have to start over.  Now every thing works except IRLP.
  This is what I get in the IRLP log
Sun Nov 25 11:03:41 CST 2018 [irlp_fullreset] Full Reset completed.

Sun Nov 25 11:03:41 CST 2018 [connect_to_reflector] Reflector ref905/Ch-0 CODEC chosen is UNCOMP.
Sun Nov 25 11:03:42 CST 2018 [connect_to_reflector] Timeout is disabled.
Sun Nov 25 11:03:42 CST 2018 [connect_to_reflector] Node Connected to base reflector ref905/Ch-0 Sun Nov 25 11:04:06 CST 2018 [end] Node Disconnect from ref9050

I am missing something..

_______________________________________________
ARM-allstar-irlp mailing list
ARM-allstar-irlp at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp



From celltech161 at gmail.com  Wed Nov 28 10:27:47 2018
From: celltech161 at gmail.com (Justin Reed)
Date: Wed, 28 Nov 2018 09:27:47 -0600
Subject: [Arm-allstar-irlp] Test
Message-ID: <d6fd4491-a290-8104-5c25-46311719ef4f@gmail.com>

Test message.




From celltech161 at yahoo.com  Wed Nov 28 13:47:56 2018
From: celltech161 at yahoo.com (Justin Reed)
Date: Wed, 28 Nov 2018 12:47:56 -0600
Subject: [Arm-allstar-irlp] IRLP board
Message-ID: <FFD6A906-B03F-48CA-BAFF-422D73A1233E@yahoo.com>

All,

I have an extra IRLP v3.0 board, original PC configuration. I?m willing to ?loan? it out to anybody who needs a board to start up a legit node long enough to move the key over to Allstar. PayPal of $50 will get it to you, and I?ll refund $40 when it comes back, if it?s back within 30 days.  If you keep it, it?s yours. You can also just continue passing it around if other people need it, work out the payment details amongst yourselves. It includes the parallel port cable. Just plug it into a 4 pin PC power plug and the parallel port and you?re good.

I tried selling a few of these on the IRLP group and D.C. got pissy. I?d rather help you guys out instead.

Private message me at celltech161 at yahoo.com

Justin
NV8Q

Sent from my iPhone


From celltech161 at gmail.com  Wed Nov 28 18:52:02 2018
From: celltech161 at gmail.com (Justin Reed)
Date: Wed, 28 Nov 2018 17:52:02 -0600
Subject: [Arm-allstar-irlp] IRLP board
In-Reply-To: <FFD6A906-B03F-48CA-BAFF-422D73A1233E@yahoo.com>
References: <FFD6A906-B03F-48CA-BAFF-422D73A1233E@yahoo.com>
Message-ID: <6297b0b4-6560-ec24-8a6a-de369440a72a@gmail.com>

Never mind. Somebody squealed to the IRLP folks about it. The deal is off.

On 11/28/2018 12:47 PM, "Justin Reed via ARM-allstar-irlp" wrote:
> All,
>
> I have an extra IRLP v3.0 board, original PC configuration......