[Arm-allstar-irlp] IRLP Install Failure

[Paul - KN2R]

Hey that’s great news John,

 

Glad you now have it working.  The ‘troubleshoot_irlp’ script is from the original distribution and may not apply to this system.

 

Regards,

Paul / KN2R

 

 

From: John [mailto:wb5nfc at gmail.com] 
Sent: Tuesday, May 15, 2018 11:52 AM
To: PaulKN2R at gmail.com
Subject: Re: [Arm-allstar-irlp] IRLP Install Failure

 

Hello, Paul. Thanks for the info. I’ve got everything sorted out now. Had a couple of user-created errors. The fact that I could not use WinSCP to move my .pgp file threw me for a while. Finally relented and used the mv command. 

 

My main question was about some of the default IRLP troubleshooting tools working from within the Allstar bash prompt. Apparently the troubleshoot_irlp script does not. When I run it, mine shows multiple errors, but my node shows up as being active on the IRLP site and the IRLP test reflector works. 

 

John

Sent from my iPhone


On May 15, 2018, at 10:42 AM, Paul - KN2R <paulkn2r at gmail.com> wrote:

Hi John,

 

Your IRLP node is attached to your AllStar node you defined in the irlp.conf file.

You will not see it on your screen unless you define a private node just for your IRLP node.  Have you tried to connect to another IRLP node?  Note: Supermon Howto file on how to call IRLP nodes.  The IRLP node you connect to will then show up in Supermon.

 

Paul / KN2R

 

 

From: Doug Crompton [mailto:wa3dsp at gmail.com] 
Sent: Monday, May 14, 2018 4:15 PM
To: Paul Aidukas
Subject: Fwd: [Arm-allstar-irlp] IRLP Install Failure

 

 

---------- Forwarded message ----------
From: John <wb5nfc at gmail.com>
Date: Sun, May 13, 2018 at 12:37 PM
Subject: Re: [Arm-allstar-irlp] IRLP Install Failure
To: Doug Crompton <doug at crompton.com>, arm-allstar-irlp at hamvoip.org




Removal of the directory worked - no errors on reinstall. Remainder of Howto changes completed, but IRLP node is not showing up after reboot (15 minutes after).

Should the troubleshoot-Irlp script work? 


su - repeater

./scripts/troubleshoot-irlp

first has me source the environment file, then runs with multiple errors. 

John

 

 

On Sun, May 13, 2018 at 10:56 AM, Doug Crompton <wa3dsp at gmail.com> wrote:

John,

 Did you previously have a /home/irlp directory on that server? This is not a serious error and you could just go on. Worst case do  'chmod 775 /home/irlp'

You could also just delete the entire directory and reload the package in which case it should give no errors.  rm -rf /home/irlp

73 Doug

WA3DSP

http://www.crompton.com/hamradio

 

 

On Sun, May 13, 2018 at 11:08 AM, John <wb5nfc at gmail.com> wrote:

After locating a copy of my IRLP node backup  with pgp key, I attempted to load the IRLP files. I updated my node and then did a pacman -Sy hamvoip-irlp-support. Process finished with "warning directory permissions differ on /home/irlp filesystem: 755  package: 775 

Suggestions on where/what to check?

 

Copy and paste of the session below:

[root at 27911 irlp]# pacman -Sy hamvoip-irlp-support
:: Synchronizing package databases...
 core is up to date
 extra is up to date
 community is up to date
 alarm is up to date
 aur is up to date
 hamvoip is up to date
resolving dependencies...
looking for conflicting packages...

Packages (2) usleep-1.0-3  hamvoip-irlp-support-0.2-1

Total Installed Size:  0.03 MiB

:: Proceed with installation? [Y/n] Y
(2/2) checking keys in keyring                     [######################] 100%
(2/2) checking package integrity                   [######################] 100%
(2/2) loading package files                        [######################] 100%
(2/2) checking for file conflicts                  [######################] 100%
(2/2) checking available disk space                [######################] 100%
:: Processing package changes...
(1/2) installing usleep                            [######################] 100%
(2/2) installing hamvoip-irlp-support              [######################] 100%
warning: directory permissions differ on /home/irlp/
filesystem: 755  package: 775
[root at 27911 irlp]#

John


_______________________________________________
Arm-allstar-irlp mailing list
Arm-allstar-irlp at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp

 


_______________________________________________
Arm-allstar-irlp mailing list
Arm-allstar-irlp at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp

 


_______________________________________________
Arm-allstar-irlp mailing list
Arm-allstar-irlp at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180515/f957bdf2/attachment-0001.html>