[Arm-allstar-irlp] Howto for IRLP

[Paul - KN2R]

Doug,

 

I guess the current default is okay then.  Sounds like most are fine with the previous initial settings.

 

Paul

 

 

From: Arm-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of wl7lp at wl7lp.com
Sent: Friday, April 20, 2018 11:48 PM
To: arm-allstar-irlp at hamvoip.org
Subject: Re: [Arm-allstar-irlp] Howto for IRLP

 

 I would think that maybe those settings happen to be better for him and would not necessarily be right for others.

73 Russ WL7LP
Alaska Morning Net - Net Manager
IRLP node 7369, AllStar 29332
http://wl7lp.com 

Quoting Doug Crompton <wa3dsp at gmail.com>: 

Paul,

 If those are better startup settings then perhaps we should change the defaults?

Doug

 

 

On Fri, Apr 20, 2018 at 12:25 PM, Paul - KN2R <paulkn2r at gmail.com> wrote:

In rpt.conf file I would suggest these two changes from the default settings: 

irxgain=-7 ; IRLP receive gain adjustment 

itxgain=5.5 ; IRLP transmit gain adjustment 

Paul / KN2R 

From: Arm-allstar-irlp [mailto:arm-allstar-irlp-bounces at hamvoip.org] On Behalf Of Doug Crompton
Sent: Friday, April 20, 2018 12:13 PM
To: arm-allstar-irlp at hamvoip.org
Subject: [Arm-allstar-irlp] Howto for IRLP 

I would like to publish the IRLP howto on the website but before I do that are there any comments on it? Anything that should be added, corrected, etc. Has it been helpful in setting up your IRLP? Are there any changes you would suggest that might make it easier? I am again attaching it. 




73 Doug 

WA3DSP 

http://www.crompton.com/hamradio 


_______________________________________________
Arm-allstar-irlp mailing list
Arm-allstar-irlp at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar-irlp/attachments/20180421/fe6f4fc7/attachment-0001.html>