[Arm-allstar-irlp] Experimental Reflector problem

David McGough kb4fxc at inttek.net
Wed Apr 4 14:40:06 EST 2018


Hi Joe,

Thanks for sending the log. The only thing I see is that the reflectors 
that worked used the UNCOMP (ulaw) CODEC, the experimental nodes that 
didn't work were trying to negotiate the ADPCM CODEC.

I seem to recall, way back in yesteryear, there was a patch for the 
Asterisk ADPCM CODEC to make it compatible with IRLP??? Am I remembering 
this right???  It so, we may not have that patch applied???

...Can anyone connect to experimental reflectors or to nodes not running
ulaw?

Thoughts anyone?


73, David KB4FXC



On Wed, 4 Apr 2018, Joe Mc wrote:

> see attached copy of  /tmp/irlp-debug.log
> Thanks,  Joe K8STN   stn8385
> 
> On Wed, Apr 4, 2018 at 2:43 PM, David McGough <kb4fxc at inttek.net> wrote:
> 
> >
> > Hi Joe,
> >
> > Please have a look at, and send a copy of this debug log:
> >
> > /tmp/irlp-debug.log
> >
> > This is a log of commands issued directly from Asterisk/chan_irlp.
> >
> > 73, David KB4FXC
> >
> >
> > On Wed, 4 Apr 2018, Joe Mc wrote:
> >
> > > Will not connect to IRLP Experimental Reflector 0071 or 0051. Works fine
> > on
> > > Reflectors 9050, 9100 ect.
> > >
> > > >From IRLP Log
> > >
> > > Wed Apr 04 12:03:42 EDT 2018 [irlp_fullreset] Full Reset completed.
> > > Wed Apr 04 12:03:42 EDT 2018 [experimental_call] The experimental node
> > > is using a hostname: ytown.crabdance.com
> > > Wed Apr 04 12:03:42 EDT 2018 [experimental_call] The experimental node
> > > IP is determined to be 162.255.211.109
> > > Wed Apr 04 12:03:42 EDT 2018 [experimental_call] Timeout is disabled.
> > > Wed Apr 04 12:03:42 EDT 2018 [experimental_call] Node Connected to
> > > experimental node exp0071, CODEC=ADPCM
> > > Wed Apr 04 12:03:43 EDT 2018 [experimental_call] CODEC at this point is
> > =ADPCM=
> > > Wed Apr 04 12:04:07 EDT 2018 [end] Node Disconnect from exp0071
> > > Wed Apr 04 12:04:07 EDT 2018 [dropcall] Call dropped.
> > >
> > > Thanks for everything and if you would like more info on problem I'll
> > > respond promptly.
> > > Joe K8STN   stn8385
> > >
> > > P.S. Everything done as instructed by hamvoip Allstar IRLP Setup
> > Procedure
> > > V1.0 03/25/18
> > >
> >
> > _______________________________________________
> > Arm-allstar-irlp mailing list
> > Arm-allstar-irlp at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar-irlp
> >
> 



More information about the Arm-allstar-irlp mailing list